Skip to contentSkip to conversation

Qt make: g++: Command not found issue with SDK generated for soloX

DISCUSSION Alankar Dhobale 2 participants 4 messages Dec 9, 2016

lore
Share & tools
lore
#0 lore raw

i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk

https://github.com/Freescale/fsl-community-bsp-platform

then i added qt support in the build by following

http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard

after that i bitbaked toolchain for this using following

$ bitbake meta-toolchain-qt5

after this i generated sdk using following command

$ bitbake <image-name> -c populate_sdk

and then i installed the sdk on my development machine, it is installed under

/opt/poky/2.1.1/

now i installed and setup latest Qt by using following steps

https://community.nxp.com/thread/309578

After all this setup done, i created a simple console application and trying to build it, and i get an error as

14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step. 14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt 5 -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt 5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mk specs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project HelloWorld (kit: mx6solox) The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.

i have googled a lot but could not find any solution on this.

Can somebody please help on this...

Kind Regards,

Alankar Dhobale

#1 lore raw

As per the documentation, the compiler isn't just "gcc" but has the full platform triple in:

http://www.yoctoproject.org/docs/2.1/sdk-manual/sdk-manual.html#makefile-based-projects

One you've sourced the setup script these are set as $CC and so on, so your makefile should be using $CC instead of 'gcc'.

Ross

Quoted 98 lines · Alankar Dhobale

i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk

https://github.com/Freescale/fsl-community-bsp-platform

then i added qt support in the build by following

http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard

after that i bitbaked toolchain for this using following

$ bitbake meta-toolchain-qt5

after this i generated sdk using following command

$ bitbake <image-name> -c populate_sdk

and then i installed the sdk on my development machine, it is installed under

/opt/poky/2.1.1/

now i installed and setup latest Qt by using following steps

https://community.nxp.com/thread/309578

After all this setup done, i created a simple console application and trying to build it, and i get an error as

14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step. 14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/ cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5

(quoted diff) +0 -2
-I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5/QtCore
-I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-

gnueabi/usr/lib/qt5/mkspecs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2. Error while building/deploying project HelloWorld (kit: mx6solox) The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.

i have googled a lot but could not find any solution on this.

Can somebody please help on this...

Kind Regards,

*Alankar Dhobale*

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw

Hello Ross,

Thanks for your reply, but I did not get you, I actually sourced the setup script for the sdk toolchain installed at path /opt/poky/2.1.1/…

But I think “make” is somehow calling g++ instead of calling arm-poky-linux-gnueabi-g++. I am not sure about the generated sdk is correct?

Alankar

From: Burton, Ross [mailto:[email protected]]
Sent: 09/12/2016 6:05 PM
To: Alankar Dhobale
Cc: [email protected]
Subject: Re: [yocto] Qt make: g++: Command not found issue with SDK generated for soloX

As per the documentation, the compiler isn't just "gcc" but has the full platform triple in:

http://www.yoctoproject.org/docs/2.1/sdk-manual/sdk-manual.html#makefile-based-projects

One you've sourced the setup script these are set as $CC and so on, so your makefile should be using $CC instead of 'gcc'.

Ross

On 9 December 2016 at 11:57, Alankar Dhobale <[email protected]> wrote:

i have used following steps to get and build the BSP for soloX sabre board. i am using Krogoth branch to build the bsp and populate sdk

https://github.com/Freescale/fsl-community-bsp-platform

then i added qt support in the build by following

http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard

after that i bitbaked toolchain for this using following

$ bitbake meta-toolchain-qt5

after this i generated sdk using following command

$ bitbake <image-name> -c populate_sdk

and then i installed the sdk on my development machine, it is installed under

/opt/poky/2.1.1/

now i installed and setup latest Qt by using following steps

https://community.nxp.com/thread/309578

After all this setup done, i created a simple console application and trying to build it, and i get an error as

14:10:10: Running steps for project HelloWorld...
14:10:10: Configuration unchanged, skipping qmake step.
14:10:10: Starting: "/usr/bin/make"
g++ -c -pipe -O2 -std=gnu++0x -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_CORE_LIB -I../HelloWorld -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5 -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/include/qt5/QtCore -I. -I/opt/poky/2.1.1/sysroots/cortexa9hf-neon-poky-linux-gnueabi/usr/lib/qt5/mkspecs/linux-g++ -o main.o ../HelloWorld/main.cpp
make: g++: Command not found
make: *** [main.o] Error 127
14:10:10: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project HelloWorld (kit: mx6solox)
The kit mx6solox has configuration issues which might be the root cause for this problem.
When executing step "Make"
14:10:10: Elapsed time: 00:00.

i have googled a lot but could not find any solution on this.

Can somebody please help on this...

Kind Regards,

Alankar Dhobale

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
Quoted 5 lines · Alankar Dhobale

But I think “make” is somehow calling g++ instead of calling arm-poky-linux-gnueabi-g++. I am not sure about the generated sdk is correct?

I'd check the generated makefiles, or your qmake files. As the documentation linked says, if you are writing bare makefiles then pass -e. If you're not, then you need to do whatever is relevant.

Ross